Perdaems Landbouwtechniek
John Deere 7530 met zaaibedcombinatie
Geplaatst op 4 april 2010

TekstklaarleggenmetdeJohnDeere7530.png picture by tteigen3GEDC6716.jpg picture by tteigen3Na een lange middag in de kilometers lange polders te hebben gereden, kwamen we bijna op het einde van de rit deze woeste combinatie tegen.GEDC6717.jpg picture by tteigen3Akkerbouwer D. Goense was vanuit het Zeeuwse land naar het mooie Brabantse land gekomen, om bij J.Laurijsse de thuispercelen zaaiklaar te leggen.GEDC6724.jpg picture by tteigen3De John Deere 7530 voor en achter op dubbellucht met de VSS  6 meterse  zaaibedcombinatie aan het bulderen bij J.Laurijsse.GEDC6725.jpg picture by tteigen3Mooi kleingereden grond.GEDC6726.jpg picture by tteigen3Een mooie close up van de John Deere 7530 met  VSS agro Zaaibedcombinatie van D.Goense.GEDC6728.jpg picture by tteigen3De breedte van de zaaibed combinatie mooi in beeld gebracht.GEDC6731.jpg picture by tteigen3De John Deere 7530  vierkant op dubbellucht een mchtig mooi beest om zo bezig te zien.GEDC6732.jpg picture by tteigen3GEDC6733.jpg picture by tteigen3GEDC6741.jpg picture by tteigen3Groot geschut omdat hier op beide percelen de volgende dag Chichorei gezaaid moet worden.GEDC6742.jpg picture by tteigen3Deze grond werd in een eerdere actie gefreesd en geploegd in Januari en valt heel mooi omdat er nog flinke vorst overheen is geweest.GEDC6744.jpg picture by tteigen3Vandaag even geen tijd voor een rondje mee, i.v.m. de grote drukte die dag.GEDC6745.jpg picture by tteigen3Snel keren en weer gas erop.GEDC6746.jpg picture by tteigen3GEDC6747.jpg picture by tteigen3Inmiddels gekeerd en weer op volle toeren naar de andere kant,  machtig geluidje uit deze John Deere 7530 en flink de gang erin.GEDC6749.jpg picture by tteigen3Een mooie close up van de VSS Agro, ook mooi te zien de drukmeters om goed zicht te hebben op hoe diep en of alles stabiel loopt.GEDC6750.jpg picture by tteigen3Én nogmaals de gehele combi van achter gezien en natuurlijk het resultaat wat de combinatie achterlaat.GEDC6756.jpg picture by tteigen3Snel een foto, vanaf de dijk, van de aanstormende John Deere 7530 met VSS Agro zaaibedcombinatie.GEDC6760.jpg picture by tteigen3GEDC6761.jpg picture by tteigen3Weer even keren en gaan.GEDC6762.jpg picture by tteigen3Op de achtergrond een ultra modern veebedrijf waar de Veenhuis Rotomax Mesthaspel enkele dagen eerder heeft geinjecteerd. Deze heeft u gisteren kunnen bekijken !GEDC6764.jpg picture by tteigen3In de verte voor mensen met goede ogen ook nog enkele tractoren in het veld.GEDC6766.jpg picture by tteigen3En weer terug waar we voor gekomen zijn.[youtube=http://www.youtube.com/watch?v=Z8oXQvUXUN8]SDC10901.jpg picture by tteigen3Die nacht had het licht geregend, dus nogmaals de John Deere 7530 erover, waarna er direct werd gezaaid. Deze zien we volgende keer in actie !SDC10902.jpg picture by tteigen3Ook snel even omgedraaid naar het erf van Mest en Fourage Handel J.Laurijsse waar op dat moment de Veenhuis rotomax Mesthaspel op ging stellen om een perceel verderop te injecteren, in beeld op dat moment de Veenhuis Quanta Pompunit met de New Holland TM 190.SDC10904.jpg picture by tteigen3Nu weer de John deere 7530 van D.Goense terug in beeld.SDC10906.jpg picture by tteigen3Om de grond structuur zo min mogelijk te bederven, de John Deere op dubbel lucht, een machtige machine om goed te kunnen werken op grote velden.SDC10907.jpg picture by tteigen3Gang is alles !SDC10908.jpg picture by tteigen3SDC10910.jpg picture by tteigen3SDC10911.jpg picture by tteigen3Nogmaals een mooie close up van de prachtige John Deere 7530.SDC10919.jpg picture by tteigen3Erg goed te zien dat de omstandigheden ideaal zijn om de grond zaai klaar te rijden.SDC10921.jpg picture by tteigen3Met de dijk op de achtergrond en D.Goens nog steeds volop in actie.SDC10922.jpg picture by tteigen3SDC10923.jpg picture by tteigen3Nog altijd volle concentratie op zijn werk. Hier is goed te zien dat de zaaibedcombinatie in de hefinrichting hangt.SDC10924.jpg picture by tteigen3Nog een mooi plaatje vanaf de achterkant.SDC10927.jpg picture by tteigen3Ook deze John Deere 7530 is met GPS uitgerust.SDC10928.jpg picture by tteigen3SDC10929.jpg picture by tteigen3Hier krijg je echt geen genoeg van, machtig mooi om te zien hoe deze machine door bulderd.SDC10931.jpg picture by tteigen3En met nog eenmaal de JohnDeere 7530 met de VSS Agro zaaibedcombinatie op de achterkant gezien komen we aan het einde van deze prachtige actie,wij hebben er ontzettend van genoten en hopen dat u dit ook heeft gedaan. Hou de site goed in de gaten, voor meer geweld van deze John Deere 7530 !

Displaying 11 Comments
  1. Jeroen zegt:

    Inderdaad een machtig mooi combi !!Goed bezig mannen van TrekkerTrekker !!

  2. Jeroen zegt:

    @ Jeroen Bedankt ! We doen ons best zoals je kunt zien :D !@ William Brooymans De John Deere 7810 weet ik niet, zag hem laatst wel rijden met een John Deere 7700, ook nog helemaal netjes. Hij heeft het inderdaad dik voor elkaar ! Denk niet dat Johan het heeft verhuurd. Denk gewoon dat ze een dienst voorelkaar betekenen. Dus Johan injecteerd daar, Daan ploegt hier etc ;)

  3. jurgen zegt:

    heey Perryhier een tip voor je: zoek een statief dat heb je de camera mooi stil dat heb ik ook en wat is er met het kwaliteit gebeurt of is dit niet met de oude camera

    • Jeroen zegt:

      @ Jurgen We zijn inderdaad opzoek naar een statief ! Maar nog niet de gewenste gevonden. En de kwaliteit is véél beter dan de oude filmpjes. Hier komt het omdat er iets tegen zon in is gefilmd !

  4. Ekenhorsie zegt:

    Machtig

  5. jurgen zegt:

    oke ne ik zat zo te kijken dacht huh keek later film van mij dacht mijn is veel lichter en iets scherper dus vandaar maar natuurlijk bruut geweld heb vandaag nog weer een 818 met ploeg gespot zie tf profiel

  6. Perry zegt:

    @ Jurgen We hebben inderdaad gedacht aan een statief, maar omdat er alleen statiefen zijn die wij geen voorkeur aangeven. Hebben we besloten er zelf eentje te maken. Maar bedankt voor de tip :)

  7. Roxana zegt:

    The difference between a scooptram and a loader.
    The scooptram can be an integrated machine for shoveling and
    also moving earth. The loader is mainly used for shoveling,
    launching, unloading, transporting soil and stone and various
    bulk materials. It can also perform light shoveling procedures on rocks
    and very difficult soil.
    The concept differs from the others. scooptrams are a kind of trackless equipment in mines, that happen to be widely
    used in that mining and transportation regarding underground scooptram loader mines.
    Trackless mining equipment having scooptrams
    and dump trucks as being the core has become the mainstream of mining technology
    development in your house and abroad. Loader
    is some sort of earthwork construction machinery traditional in roads, railways, building,
    hydropower, ports, mines as well as other construction projects.
    It is especially used for shoveling bulk materials like soil,
    sand, lime along with coal, and can in addition be used for ore,
    Very difficult soil, etc. for light shoveling operations.
    Different auxiliary working devices can be used for bulldozing,
    lifting along with materials such as hardwood loading and unloading treatments.
    In the construction of roads, especially in high-grade roads, loaders are
    used pertaining to filling and excavating roadbed performs,
    asphalt mixtures and aggregate and loading of bare concrete concrete yards.
    In supplement, it can also execute operations
    such as pressuring soil, leveling the terrain, and pulling other equipment.
    Because the loader has to flourish fast working speed, huge
    efficiency, good maneuverability, along with light operation, it has become on the list of main types of
    the planet and stone construction around engineering construction. The scope of
    application takes a different approach.
    The main functions of the scooptram: digging, transporting, unloading, filling,
    leveling, suitable for water dam construction and silt elimination after floods.
    Loaders, commonly also known as forklifts, are mainly used intended for loading and unloading and
    so are applicable to engineering engineering.

  8. Gerardo zegt:

    Cymoxanil is applied to be a seed treatment to slice potato seed pieces or to be a foliar application to the
    plants to control late blight (Phytophthora infestans).
    The particular end-use product, Curate 60 DF is formulated to be a 60% dry flowable ingredients.
    Curate 60 DF might be used only in blend (tank mixed) with other protectant fungicides for instance mancozeb, chlorothalonil,
    triphenyltin hydroxide, as well as metiram. As a seedling treatment,
    the product is used by dipping the 2 seed pieces in a very concentrated
    slurry or through mist seed treating products. The maximum application price
    is 1. 0 ounce . of per hundred weight associated with cut seed pieces.
    As a foliar application, the product is applied by soil,
    air or chemigation. The maximum application quote for foliar applications
    can be 3  oz per acre using at the very least 20 gals/acre for normal ground spray, 10 gals/acre regarding
    air assisted ground bottle of spray, and 5 gals/acre pertaining to aerial spray.
    Cymoxanil Technical is targeted cymoxanil used as that active
    ingredient to construct cymoxanil end-use products. Your Reference Dose
    (RfD) regarding cymoxanil is 0. 013 mg/kg/day. This value will be based upon the NOEL of
    FIVE. 08 mg/kg/day from some sort of chronic feeding study inside rats.
    The Uncertainty Factor of 300 was used to account for interspecies extrapolation, intraspecies variation plus the enhanced sensitivity of
    children and children. A chronic exposure examination was conducted using building up a tolerance level residues and HUNDRED percent crop treated facts to estimate the Theoretical Utmost Residue Contribution (TMRC) for that general
    population and 24 subgroups. The chronic analysis showed that exposure through the proposed
    tolerance in or on potatoes as well as use on tomatoes below the Section 18 emergency exemptions program resulted
    in a TMRC of cymoxanil in surface waters and in ground
    water are not as much as EPA’s levels of problem for cymoxanil in mineral water as a contribution for you to acute and chronic get worse exposure.
    Therefore, EPA concluded with affordable certainty that residues of cymoxanil in drinking water,
    when considered along by using other sources of exposure for which EPA has reliable facts, would not result around unacceptable levels
    of get worse human health risk. Tolerances are established
    for your residues of the fungicide cymoxanil [2-cyano-N- [(ethylamino)carbonyl]-2-(methoxyimino) acetamide] within or on potatoes in 0.
    05 ppm.

  9. Catharine zegt:

    CNC machine is involves the following parts: Mattress, Headstock, Tailstock, Tailstock quill,
    Footswitch or maybe pedal, Chuck, Control section, Tool turret.
    The bed is sort of hardened parts of a machine as the tool turret travels within the
    CNC machining parts lathe bed, sorts of machining can’t affect them.
    The headstock is the key part of the equipment, here the workpiece is fixed that you perform an operation and also Headstock of an CNC lathe machine has the key motor which drives the
    chief spindle. The tailstock is designed for providing extra grip into the workpiece.
    When the operations like knurling, threading has performed these parts
    utilized to hold the workpiece. By these pedals, CNC machinist’s open up and close the chuck to grip the aspect, the same way tailstock quill is taken to forward location or
    reversed. Chuck is installed on the main spindle. The following we fixed the workpiece.
    The control panel is another main component to the CNC machine through which
    we use to set or feed this software for the operation we
    perform about the workpiece. The tool is installed on the tool
    turret which is often used for component machining.

    Tool turrets vary in shapes and may be tools that can be attached to them.

    These are the Parts of CNC machine, now I will talk about the CNC technique.

    The CNC machine works dependant on CAD and CAM techniques and
    computer control.
    CAD (Computer-Aided Design) is usually drawing software.

    Also, CAD software is utilized to increase the productivity from the designer, improve the top quality of
    design, improve marketing and sales communications through documentation, and to set-up a database for producing.

    Whereas, CAM (Computer-Aided Manufacturing) having a pair of codes like G-code and M-codes
    what is the right all the programs are written and feed into the machine to perform
    the several operations.

  10. Dianne zegt:

    Real wood plastic composite flooring, or even WPC flooring, is a vinyl plank or maybe vinyl tile flooring which has
    a rigid core that’s created from either recycled wood pulp along with plastic
    or polymer composites that happen to be expanded with air.
    It’s occasionally called “wood polymer composite flooring.
    ” It is really a light weight, low density construction that
    is warm and soft underfoot using greater comfort.

    Both WPC and SPC flooring are water-resistant and incredibly durable to wear caused
    by high traffic, incidental scratches and helping those
    less. The essential difference between WPC and SPC flooring comes to the density of in which rigid core layer.

    Diamond is denser than wood, which sounds more confusing than it’s.

    As a shopper, all that’s necessary to do is look at the difference between a tree and a rock.
    Which has much more give? The tree. Which will handle
    a heavy impression? The rock.
    Here’s precisely how that translates to decking:
    WPC consists of a new rigid core layer that’s thicker and lighter than the SPC core.
    It is usually softer underfoot, which makes it comfy
    to stand or wander on for longer time frames. Its thickness can give it a warmer feel which is good
    at absorbing noise.
    SPC consists of your rigid core layer that’s
    thinner plus more compact and dense than WPC. This compactness can make it less likely to broaden or contract during extreme temperature swings,
    which can enhance the stability and longevity
    within your flooring. It’s also more durable on the subject of impact.

    While you’re taking a look at luxury vinyl plank in addition to vinyl tile options,
    you’re prone to come across lots of waterproof flooring options also.
    While WPC and SPC floors are water-resistant, you
    still need to be able to care and maintain these kind of
    flooring properly in order to get the most use outside them.

    What the term ‘waterproof flooring’ means is always that these floors hold ” up ” well to spills as well as splashes.
    You should never let water (or every other liquid) pool or collect on your
    floors, no matter what they’re crafted from.

    This can cause long lasting damage and, in many cases, it can useless your flooring warranty.

Laat een reactie achter


Facebook